제품소개
Made entirely from first-quality synthetic material, CINTROPUR filters
are perfectly suitable for food products and drinking water.
The CINTROPUR vane transforms the liquid flow into a centrifugal spin
by throwing the larger particles down into the lower bowl, according to
the chosen filter sleeve micron-size.
Protection of industrial as well as residential and agricultural installations
by filtering the solid particles (earth, sand, rust, etc,…) suspended in the
water.
01
산업용에서 부터 가정용에까지 광범위 하게 사용가능한 전처리 필터
( 호텔, 레스토랑, 학교, 빌딩 등등 )
02 “CENTRIFUGAL SPIN”의 채택으로 큰 이물질의 포집을 극대화 함.
03 “Polyphosphate” 재질의 선택으로 내압성이 강하며, 60℃ 온도 까지 사용 가능
04 투명 재질의 용기로 필터의 수명 및 가동상태를 육안으로 확인 가능
05 적은 압력손실로 안정적인 유량 공급이 가능
06 나일론 재질의 필터 채택으로 재활용이 가능 (소모성 경비의 절약)
07 입자성 이물질을 쉽게 제거하기 위한 밸브 채택 (산업용)
최초 구매시 25micron 필터 1장과 Black Spanner가 포함
Filter type | NW 18 | NW 18 | NW 18 | NW 32 TE | |
---|---|---|---|---|---|
Diameter of pipe | 2″ | 2½” | 3″ | 2″ | |
Average flow rate: | ㎥/h | 18 | 25 | 32 | 2* |
Δp=0.2bar | 2.8psi gpm | 79 | 110 | 141 | 9* |
Working pressure: | bar | 10 | 10 | 10 | 10 |
psi | 145 | 145 | 145 | 145 | |
Max. operating pressure: | bar | 16 | 16 | 16 | 16 |
psi | 232 | 232 | 232 | 232 | |
Max. operating t˚ | 50˚C | 50˚C | 50˚C | 50˚C | |
122˚F | 122˚F | 122˚F | 122˚F | ||
Weight: | kg | 6.4 | 7 | 7.4 | 5.6 |
pounds | 14.11 | 15.43 | 16.31 | 12.35 | |
Standard filter sleeve | 25μ | 25μ | 25μ | - | |
Volume of the bowl: | ltr | - | - | - | 4.85 |
US Gal | - | - | - | 1.28 | |
Filtration: | ㎠ | 1288 | 1288 | 1288 | - |
Surface | Sq inches | 199.64 | 199.64 | 199.64 | - |
Sides en | A (Ø)) | B | C | D | |
---|---|---|---|---|---|
NW500 | 2" | DN50 | 363(14.29) | ±140(±5.51) | |
NW650 | 21/2" | DN65 | 304(11.97) | ±140(±5.51) | |
NW800 | 3" | DN80 | 313(12.32) | ±140(±5.51) | |
NW500 TE | 2" | DN50 | 363(14.29) | ±86(±3.39) |
Non washable5μ / 10μ / 25μ / 50μ / 100μ
Washable150μ
NW 25TE0.85 l / 0.22 US Gal (4 refills)
Washable1.70 l / 0.45 US Gal (2 refills)
Indicate the system pressure. Filter sleeves are to be changed
at ΔP of 2 bar or at least 3 times a year
- Metric 76 for 500/650 heads
- Metric 88 for 800 heads g
Use only CINTROPUR fittings/flanges
It creates a cyclonic effect on the intake water flow which precipitates the large particles
at the bottom of the filter bowl. The inner/outer pre-moulded joints and the set screw
will ensure optimum sealing
Allows to evacuate the impurities deposited on the bottom of the bowl as a result
of the cyclonic action of the centrifugal vane
To be placed between the flange and counter flange.
For NW650 (Ref. 67) – for NW800 (Ref. 68)
Stainless steel wall bracket is to be attached to the filter head
with two locking nuts. Same model for all industrial filters.
Stainless steel wall bracket is to be attached to the filter head
with two locking nuts. Same model for all industrial filters.
Device inside the TE filter: used for water treatment by activated carbon
or polyphosphates; may also be placed in the NW650 and NW800.